Air cooling motor

Air cooling motor OPERATING LIMITS 5% rated voltage Ambient temperature up to +40 Installation altitude up to 1000 meters above sea levelSTRUCTURAL CHARACTERISTICS Dynamically balanced MOTOR SHAFT with double-shielded life-lubricated bearings(working life more than 5,000 hours). Open and self-ventilated induction MOTOR,designed for continuous duty. -The stator pack in made of low-leakage magnetic laminations(2.63 Watt/kg). -Stator windings are manufactured using wire with double class H insulation;heads carefully bound and shaped by pressure. Lmpregnation is done in a continuous cycle by PREHEATING-IMMERSION BAKING with extremely pure ideally-polyester resin, motors insulation is class B. This gives a high quality winding with excellent insulation and heat transmission properties. -The rotor is the squirrel-cage type. -The capacitor is supplied as standard. -Surface protection of the electric motor assembly is achieved by a complete treatment cycle, including rust-proofing,pickling,phosphatizing,passivation,two coat paint finish applied by and electrostatic process and oven baked. NAME PLATE showing all the main electrical and mechanical characteristics and electrical connection diagram. PROTECTION IP 23. OPERATION VOLTAGE: motors are available in stock for single-phase 230 Volt power supply. Other voltages are available on request. Motors are designed to accept maximum 5% mains voltage variations with respect to rated values. FREQUENCY: motors are available in stock for 50Hz frequency. Motors for 60Hz frequencies are available on request.